Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on. If this does not solve the problem, check the following:
The lights on the projector may indicate what the problem is.
The projector's Help system can display information about common problems, if the projector is operating.
The solutions in this manual can help you solve many problems.
If none of these solutions help, you can contact Epson for technical support. Projector Light Status
The lights on the projector's control panel indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table below:
Note:If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact your SysOp for help.
Important Safety Information:
Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in thisUser's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Warning: The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation.
Caution: When you replace the lamp, never touch the new lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.
Projection Problem Tips
If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on.
If this does not solve the problem, check the following:
If none of these solutions help, you can contact Epson for technical support.
Projector Light Status
The lights on the projector's control panel indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table below:
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact your SysOp for help.
Important Safety Information:
Caution:
Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in thisUser's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Warning:
The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation.
Caution:
When you replace the lamp, never touch the new lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.